EAA Super Sight Mount For Leupold Delta Point Pro

by Egw

Report an issue with this product's data
EAA Super Sight Mount For Leupold Delta Point Pro

User Ratings

No ratings yet

Be the first to review this product

Retail: $44.99

EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions

  • Remove the rear sight*
  • Install the EGW Sight Mount in the dovetail
  • Tighten set screw (if applicable)
  • Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
  • Apply blue Loctite to the provided mounting screws
  • Torque mounting screws to 15in/lbs

> Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

This mount fits:

  • Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight
  • Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight
  • Hunter with adjustable (LPA/Bomar style, shown above) rear sight
  • Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight
  • Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight
  • Match Elite with adjustable (LPA/Bomar style, shown above) rear sight
  • Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight
  • P Match with adjustable (LPA/Bomar style, shown above) rear sight
  • P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight
  • Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight
  • Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight

This mount does not fit:

  • EAA / Tanfoglio Witness with fixed rear sight
  • EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above

Specifications

Manufacturer:
Egw
Category:
red-dot-mount-riser
Weight:
1.5 oz
Length:
1.6"
UPC:
841370114238
MPN:
49407
Required Component:
No

Parts Cabinet

Track parts you own or plan to buy.

Where to Buy

BattleHawk Armory
In Stock
$37.32
Brownells
In Stock
$44.99
Shooting Surplus
In Stock
$40.71
Optics Planet
Availability Unknown
$44.99

Have one to sell?

Sell on Marketplace View listing rules

Sponsored

MantisX

The smart way to train your AR build

Built your rifle — now train it. BlackBeardX installs in minutes and turns your AR into a full dry fire system with smart feedback on every pull.

Shop BlackBeardX

Price History

Current

$37.32

Lowest

$37.15

Highest

$44.99

Tap data points for details

Price Alert

Sign in to save a target price and receive an email when this component drops.

Sign In to Set Alert

Builds Using This Part

No builds yet — be the first to use this part.

Related Guides

Guide

AK Optics Mounting Guide: Side Rail vs Dust Cover vs Handguard

Compare the main AK optics mounting approaches and choose the right setup for durability, repeatable zero, and practical shooting performance.

8 min read

Guide

Glock-Compatible Red Dot Setup and Zeroing Basics

How to set up a red dot on Glock-compatible pistols, avoid mounting mistakes, and choose a practical zero for defensive and range use.

7 min read

Guide

AR-15 Optic Height Over Bore Explained (1.54, 1.93, 2.26)

An AR-15 optic mounting guide explaining height over bore, close-range offset, holdovers, and tradeoffs between absolute co-witness, lower-third, and taller mount heights.

7 min read

Submit a Review

Reviews

Loading reviews…