EGW Red Dot Sight Mount for Vortex Viper/Venom, Fits CZ75/85/P-01

EGW red dot sight mount designed for installing from left to right (muzzle facing forward). The dovetail has a progressive taper for easier installation. Remove the rear sight to install the mount, and you can remove the mount later to reinstall the rear sight.

Uses

Mounts compatible red dot sights on the CZ dovetail, including:

• Vortex Viper/Venom
• Burris FastFire
• Docter

Installation (includes mounting hardware)

1. Remove the rear sight.
2. Install the EGW sight mount in the dovetail.
3. Tighten set screw (if applicable).
4. Place the red dot sight on the EGW sight mount (use a small piece of paper between the optic and mount for easier removal and to keep Loctite off the optic).
5. Apply blue Loctite to the provided mounting screws.
6. Torque mounting screws to 15 in/lbs.

Included screws

• 2 button head cap screws for Vortex Viper and Venom sights
• 2 flat head cap screws for Burris FastFire and Docter sights

Note: Included screws require a 5/64" Allen wrench for installation. Modification of your firearm may nullify the manufacturer’s warranty.

• This product should be installed and checked by a qualified gunsmith.
• No liability is expressed or implied for damage or injury from improper installation or use.

Fitment (mounts to CZ dovetail)

• CZ 75
• CZ 75 SP-01
• CZ 75 SP-01 Phantom
• CZ 75 SP-01 Shadow
• CZ 85
• CZ 97B
• CZ 97D
• CZ P-01
• CZ P-07 (may require fitting due to variance in dovetail dimensions)
• CZ P-09 (may require fitting due to variance in dovetail dimensions)
• CZ PCR (there will be a gap under the front of the adapter plate)
• Tristar P120