Area 419 Hellfire Self Timing Muzzle Brake .338 Stainless

Area 419 Hellfire Self Timing Muzzle Brake\n\nOverview\nThe HELLFIRE Self Timing Brake system is not just another knockoff copy of existing self timing brakes. It was engineered from the ground up to be extremely effective, easier to install, and much more versatile. Caliber selection: We have four caliber selections available for the HELLFIRE brake. The difference in efficiency between using a caliber specific brake bore, and the next size up is minimal, so we simplified things to lower costs. Simply torque the universal adapter onto your barrel with a 5/8 inch wrench, this piece never has to come off. Next, LEFT HAND thread the brake/collar assembly onto the adapter until snug. Then rotate the brake until level, push the brake into the adapter and you will feel it lock onto the taper. Now tighten the collar fully by hand, and you are done. Rearward facing ports for recoil reduction. The HELLFIRE showed 52% recoil reduction on a 6.5 Creedmoor test rifle. This is ~4% more than the one of the most popular brakes on the market.\n\nSpecifications for Area 419 Hellfire Self Timing Muzzle Brake:\nManufacturer: Area 419\nProjectile Caliber: .338 Caliber\nCaliber: .338 Winchester Magnum\nFabric/Material: 17-4PH Stainless Steel\nLength: 3.5 in\nWeight: 0.5 lb\nCondition: New\n\nFeatures of Area 419 Hellfire Self Timing Muzzle Brake\n- Extremely easy installation, brake WILL NOT turn as you torque the collar to lock. No more guessing where the brake ports will line up once you tighten it down!\n- Simple round knurled nut that requires no tools to time the brake.\n- Return to zero is excellent, this means removal of your brake and re-installation will not require a zero change.\n- Proprietary port design controls muzzle rise without the use of top porting.\n- Face of brake is engraved with caliber to indicate the top for correct orientation, and a horizontal line to aid in leveling.\n- Made from heat treated 17-4PH Stainless Steel\n- Brakes will be available in Black Nitride finish or raw stainless (all universal adapters will be black)\n- Manufactured on state of the art CNC Machines right here in NW Ohio. 100% Made in USA.\n- 1" OD Brake, 1.1" OD collar\n- Brake assembly will add 2.6" from the thread shoulder (approx 2" added to OAL of barrel)\n\nPackage Contents:\n- Area 419 HELLFIRE Self Timing Muzzle Brake