Brownells Aluma-Hyde II 12 oz Aerosol Spray-On Gun Finish - Matte Stainless-Steel Gray

Aluma-Hyde II Spray-On Gun Finish (12 oz Aerosol)

Aluma-Hyde II is a hard-curing epoxy-based finish designed for increased resistance to bore cleaners, solvents, and other cleaning chemicals, including trichloroethylene.

• No primer coat required on properly prepared surfaces
• Solvent-proof to all but the most aggressive copper-removing bore solvents after full cure
• Sticks to properly prepared aluminum/alloy surfaces, steel, and plastics (including synthetic stocks)
• Dries to the touch in 10–15 minutes; full cure ~1 week
• Recoat timing: apply second coat within 30 minutes; after 30 minutes, cure 10–14 days before recoating
• Speed cure: bake 3.5 hours at 195°F

Clean Out Nozzle

Each can includes a Clean Out Nozzle for use before each application to help prevent clogs in the nozzle and pickup tube.

Surface prep (high level)

• Surface should be dry and free of oil, wax, dirt, loose paint, and other contaminants.
• Clean/degrease painted surfaces as needed.
• Test color compatibility and adhesion on a small area first.

Application overview

• Prep the can: Shake vigorously; then shake for 2 minutes after the ball rattles.
• Initial clearing spray: use the Clean Out Nozzle as needed for consistency.
• Spray it on: hold the can about 12 in from the work surface.
• Cure: allow proper cure time before recoat/handling.

Specs: 12 oz (340 g) aerosol can.