Brownells Aluma-Hyde II Matte O.D. Green Spray-On Finish 12 oz Aerosol

Brownells Aluma-Hyde II (Epoxy Spray-On Gun Finish)

Aluma-Hyde II is a hard-curing epoxy-based spray-on gun finish with increased resistance to bore cleaners, solvents, and other cleaning chemicals. After full cure, it is solvent-proof to all but the most aggressive copper-removing bore solvents.

Key features

• Hard-curing epoxy base with high-density pigment for a durable finish
• Bonds to properly prepared aluminum/alloy surfaces, steel, and plastics (including synthetic stocks)
• No primer coat required for a tough, durable, abrasion-resistant, rustproof finish
• Dries to the touch in about 10–15 minutes
• Full cure in about a week (and 10–14 days before recoating if applying a second coat)
• Supplied with a Clean Out Nozzle to prevent clogs before each use

Can / quantity

• 12 oz (340 g) aerosol can

Surface prep (summary)

• No priming required on clean, bare metal or anodized surfaces
• Surface should be dry and free of oil, wax, dirt, loose paint, and other contaminants

Application / cure (summary)

• Use can temperature between 70°F and 90°F (not below 65°F); shake vigorously until the ball rattles, then shake an additional 2 minutes
• Hold can about 12 inches from the surface; fully depress the valve to spray
• If a second coat is needed, apply within 30 minutes; otherwise allow 10–14 days cure before recoating
• Wait 24 hours or more before extensive handling

Included

• Clean Out Nozzle included with each can (required before each use to prevent clogs)